Two For Tuesday: Painting Tools
I’ve done a few Tuesday Tool Twofers posts in the past to highlight software or web-based apps that I’ve come to rely upon. But this time, I’m breaking out of the digital realm and showcase a couple of “real” tools that I’ve been using lots lately.
Not long after we moved into Kirkwood Manor, we asked our trusty handyman Truett to replace a few of the old, cruddy interior doors. (The guy is a wizard, literally replacing a door, hardware and all, in less than 30 minutes!) Well, he took it upon himself to do all of them. Right, he swapped out every interior door in the place except for the bi-fold closet doors in our master bath! Now, the new 6-panel doors do look fantastic, and we were very pleasantly surprised to discover that he’d done them all, but it did leave us with one small problem…
Painting all of those newly-hung doors!
Months later, I’m finally getting some traction on that project. Painting is a bit of a chore anyway and the raised panel styling of these doors made that even more tedious a prospect. Add into the mix an eager-to-help 4 yr old, and you can begin to see why I dragged my heels on getting this started for so long. But I splurged on a tool that’s making a huge difference: the Graco Spray Station 2900.
The Graco is working very well! I do have to thin out the latex paint to get to a viscosity suitable for spraying, and this took a little trial & error to get just right. Otherwise though, I’m very happy with this! It’s an easy-to-use paint spraying system that requires minimal adjustments. And cleanup—the thing I feared the most—is much easier than I had imagined.
So, I’ve got a makeshift assembly-line setup (complete with Dexter-inspired plastic sheeting) in the fenced off carport behind Liam’s room where I’m knocking out the doors 2 or 3 at a time:
In keeping with the painting theme, the 2nd tool that’s become an essential part of my toolkit is a very inexpensive gadget I read about in Family Handyman magazine (a very practical Christmas gift, courtesy of my bro Rich!) called a painter’s comb.
I found mine, a Wooster brand, at Home Depot for about $5 and it makes cleaning out paint brushes a breeze! The stainless steel pins work paint out of the interior of the brush and reshape the bristles after washing so they dry straight & flat. This tool will help you get lots more mileage out of your brushes!
Some painting tips we’ve picked up along the way:
- Splurge on better brushes. They yield much better results when painting, clean up easier, and hold their shape better if you clean them thoroughly (with a painter’s comb, of course!).
- If you’re going to leave your brush idle for even 5-10 minutes, toss it in a ziplock baggie and squeeze out as much air as you can. This will help prevent the paint from setting up within the bristles, which makes cleaning all the more difficult.
- Forget the evil blue masking tape and instead go green! Get some Frog Tape for masking off areas when painting around trim molding, cabinets, etc.
- You can keep your paint cans clean, dribble-free, and easy to reopen by snapping one of these inexpensive spout stretchers on the inner rim before pouring the paint into a tray or other container. These little gems are only about a buck at nearly any home improvement store and while they call them “disposable,” they’ll last forever with a little care.
Have any tools that you find indispensable? Let us know about ‘em! Any painting tips you’d care to share? Please leave a comment!